![](/images/new-backgrounds/1284928/28492877x1.webp)
Installing and Using Monitors
Adding a Monitoring Request
Adding a Monitoring Request
Adding a monitoring request is a convenient way to add another notification method for a monitor. Each new notification method requires its own monitoring request.
Monitoring requests can only be added at the monitor level, which creates an identical request for all instances of the hardware resources supported by the monitor. Monitoring requests cannot be added for a specific hardware instance. An “A(ll)” option allows you to add a monitoring request for all monitors in one operation.
NOTE | Using the “All monitors” option when creating a request has the benefit of applying the request |
| to a new class of supported hardware resource that you may add to your system. This ensures |
| that the new hardware is automatically included in your monitoring strategy. |
|
|
To add a monitoring request:
1.Run the Hardware Monitoring Request Manager by typing:
/etc/opt/resmon/lbin/monconfig
2.From the main menu selection prompt, enter A.
3.At the Monitors selection prompt, enter the number assigned to the monitor for which you are creating a request. The numbers for the monitors are listed on the screen. You can enter multiple numbers separated by commas, or you can enter “a” to create a request for all monitors.
4.At the Criteria Threshold prompt, enter the number for the desired severity level. See Table
5.At the Criteria Operator prompt, enter the number for the desired operator. See Table
6.At the Notification Method prompt, enter the number for the desired method. See Table
7.At the User Comment prompt, enter any comments about this monitoring request that you desire. This text will be sent with events which match this monitoring request. This feature is NEW, as of the June 2000 release.
8.At the Client Configuration File prompt, enter (C)lear to use the default client configuration file, or enter A(dd) to specify the name of a specific client configuration file for this request. This file allows you to enable/disable events, set thresholding criteria and severity levels for events on a
9.Save the request when prompted.
Repeat the above steps for each new monitoring request.
NOTE | Are monitoring requests automatically applied to new hardware resources? |
| Because monitoring requests are created at the monitor level and not at the hardware instance |
| level, a new hardware resource added to the system inherits the same monitoring requests |
| assigned to other hardware of the same type. This ensures that new hardware is automatically |
| added to the monitoring configuration. When you restart the system or perform an ioscan, the |
Chapter 2 | 39 |