Item

Remarks

 

 

Memory type and size

• Default—Two 1-GB DDR2 SDRAMs

 

• Maximum—Two 2-GB DDR2 SDRAMs

 

 

 

 

 

 

 

NVRAM

128 KB

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

10 Mbps, half/full-duplex

 

 

2 copper ports (MDI/MDIX

 

 

Combo interface

100 Mbps, half/full-duplex

 

autosensing)

 

 

 

 

 

1000 Mbps, full-duplex

 

 

 

 

 

 

 

 

 

2 fiber ports

1000 Mbps, full-duplex

 

 

 

 

 

HIM

2 supported

 

 

 

 

 

 

MIM

2 supported

 

 

 

 

 

 

Hardware encryption

Supported

 

 

 

 

 

 

Hot swapping

Supported

 

 

 

 

 

 

 

 

 

NOTE:

•For a combo interface, the default operating port is the copper port. You can use either the copper port or the fiber port. To switch between the copper and fiber ports, use the combo enable { copper fiber } command in interface view. For more information about the combo enable { copper fiber } command, see HP HSR6800 Routers Interface Command Reference.

•Use transceiver modules for the fiber ports provided by HP only. The router might be incompatible with transceiver modules from other manufacturers. The system generates an alarm when a transceiver module from another manufacturer is installed.

FIP-210 combo interface specifications

Specification of combo interfaces on the FIP-210 and the FIP-110 are the same. For more information, see Table 34 and Table 35.

Transceiver modules for the FIP-210 and for the FIP-110 fiber ports are the same. For more information, see Table 36.

Maximum interface modules provided by FIP-210 in full configuration

FIP/Interface

HSR6802

HSR6804

HSR6808

module

 

 

 

FIP-210

2

4

8

 

 

 

 

MIM

4

8

16

 

 

 

 

HIM

4

8

16

 

 

 

 

FIP-300

The FIP-300 supports HIMs and MIMs, and it provides 12 combo interfaces.

98