Figure 34 LC connector

2

1

(1) LC connector

(2) Optical fiber

Connecting a fiber cable

WARNING!

Do not stare into any fiber port when you connect an optical fiber. The laser light emitted from the optical fiber might hurt your eyes.

To connect a fiber cable:

1.Remove the dust plug from a fiber port of the router.

2.Remove the dust cover from the transceiver module, and plug the end without a pull latch into the fiber port.

3.Remove the dust cover from the fiber connector.

4.Identify the Rx and Tx ports. Plug the LC connector at one end of one fiber cable into the Rx port of the router and the LC connector at the other end into the Tx port of the peer device. Plug the LC connector at one end of another fiber cable into the Tx port of the router and the LC connector at the other end to the Rx port of the peer device.

30