Powering on the router
Verifying before power-on
Before powering on the router, verify the following items:
•The power modules and fan trays are correctly installed.
•The power cord and grounding cable are correctly connected.
•The power source voltage meets the requirement of the router.
•The console cable is correctly connected, the terminal or PC used for configuration has started, and the configuration parameters have been set.
•If a CF card is used, verify that the CF card is in position.
•Make sure the installed LPUs and HIMs/MIMs are in position.
Powering on the router
•Turn on the switch of the power supply system for the router.
•Turn on the switch of the AC or DC power modules.
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Booting Normal Extend BootWare........
The Extend BootWare is
****************************************************************************
* |
| * |
* | HP HSR68 BootWare, Version 0.17 | * |
* |
| * |
****************************************************************************
Copyright (c)
Compiled Date | : Apr 10 2012 |
CPU Type | : P2020 |
CPU L1 Cache | : 32KB |
CPU Clock Speed | : 1000MHz |
Memory Type | : DDR3 SDRAM |
Memory Size | : 4096MB |
Memory Speed | : 667MHz |
Flash Size | : 8MB |
cfa0 Size | : 999MB |
NVRAM Size | : 128KB |
BASIC CPLD Version | : 1.0 |
EXTEND CPLD Version | : 1.0 |
PCB Version | : Ver.A |
43