<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0> Reboot

============================================================================

 

Ctrl+Z: Access EXTEND-ASSISTANT MENU

 

Ctrl+F: Format File System

 

Enter your choice(0-9):

 

Dealing with console login password loss when password recovery capability is enabled

1.Reboot the router to access the EXTEND-BOOTWARE menu, and then enter 6.

The current mode is password recovery.

Note: The current operating device is cfa0

Enter < Storage Device Operation > to select device.

===========================<EXTEND-BOOTWARE MENU>===========================

 

<1> Boot System

<2> Enter Serial SubMenu

<3> Enter Ethernet SubMenu

<4> File Control

<5> Restore to Factory Default Configuration

<6> Skip Current System Configuration

<7> BootWare Operation Menu

<8> Clear Super Password

<9> Storage Device Operation

<0> Reboot

============================================================================

 

Ctrl+Z: Access EXTEND-ASSISTANT MENU

 

Ctrl+F: Format File System

 

Enter your choice(0-9): 6

 

After the configuration skipping flag is set successfully, the following message appears:

Flag Set Success.

2.When the EXTEND-BOOTWARE menu appears again, enter 0 to reboot the router.The router starts up with empty configuration.

3.To use the configuration in the next-startup configuration file, load the file in system view.

<HP> system-view

[HP] configuration replace file startup.cfg

Current configuration will be lost, save current configuration? [Y/N]:n Info: Now replacing the current configuration. Please wait...

Info: Succeeded in replacing current configuration with the file startup.cfg.

4.Configure a new console login password.

74