2.The other end of the cable provides eight RJ-45 connectors. Connect them to the RJ-45 interface on the remote device as needed.

Figure 41 Connecting an 8T1 cable

Connecting a CE3/CT3 cable

Overview

CAUTION:

HP recommends that you install a special lightning protector at the input end of the E3/T3 cables to protect them against lightning strikes more efficiently when they are routed outdoors.

You can use a E3/T3 interface cable to connect the MIM-1CE3 and MIM-1CT3 modules.

Figure 42 E3/T3 cable

Connecting a CE3/CT3 cable

1.Connect the SMB connector of an E3/T3 cable to the Tx port on the interface module and the other end to the Rx port on the device to be connected.

2.Connect the SMB connector of another E3/T3 cable to the Rx port of interface module and the other end to the Tx port on the device to be connected.

34