•If the router needs to be moved over a long distance, remove all field replacement units (FRUs), such as HIMs/MIMs, put them separately in anti-static bags, and install the filler panels supplied with router.

•If the router needs to be moved over a short distance, make sure all FRUs are securely seated in slots and the screws are fastened.

•Make sure the accessories of the router are not lost or damaged during router moving.

•Make sure the ground is dry and flat and anti-slip measures are in place.

•Keep the chassis and installation tools away from walk areas.

ESD prevention

To prevent electrostatic discharge (ESD), follow these guidelines:

•Make sure the router and the rack are well grounded.

•An anti-static floor is installed and well grounded.

•Take dust-proof measures for the equipment room.

•Maintain the humidity and temperature in the acceptable range.

•Always wear an ESD wrist strap and ESD cloth when touching a circuit board or transceiver module.

•Place the removed CF card or LPU on an antistatic workbench, with the face upward, or put it into an antistatic bag.

•Touch only the edges, instead of electronic components when you observe or move a removed CF card or LPU.

To attach an ESD wrist strap:

1.Wear the wrist strap on your wrist.

2.Lock the wrist strap tight around your wrist to keep good contact with the skin.

3.Insert the ESD plug into the ESD socket.

4.Make sure the rack is well grounded.

3