1 | 38 | 53 | |
4 | 34 | 53 | |
Table 18 Command output |
|
| |
|
|
|
|
Field |
| Description |
|
SlotNo |
| Slot number of the card. | |
|
|
| |
Temperature |
| Current temperature of the card. | |
|
|
| |
Lower limit |
| Low temperature threshold of the card. | |
|
|
| |
Upper limit |
| High temperature threshold of the card. | |
|
|
|
|
Port configuration and management
Configuring a combo interface
A combo interface is a logical interface that comprises an SFP port of a transceiver module and an
Use the display interface
•If the output includes "Media type is optical fiber," it means that the port is an SFP port. For example, the following output shows that GigabitEthernet 5/0/1 is an SFP port.
[Sysname] display interface GigabitEthernet 5/0/1 GigabitEthernet4/0/0 current state: DOWN
Line protocol current state: DOWN
Description: GigabitEthernet4/0/0 Interface The Maximum Transmit Unit is 1500 Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address:
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address:
…
•If the output includes "Media type is twisted pair," it means that the interface is an
[Sysname] display interface GigabitEthernet 5/0/0 GigabitEthernet4/0/0 current state: DOWN
Line protocol current state: DOWN
Description: GigabitEthernet4/0/0 Interface The Maximum Transmit Unit is 1500 Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address:
IPv6 Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address:
…
62