[FIXED PORT] MGE4/0/0

(Hardware)Ver.B, (Driver)1.0, (Cpld)1.0

Displaying the running statistics for the router

For diagnosis or troubleshooting, you can use separate display commands to collect running status data module by module, or use the display diagnostic-information command to bulk collect running data for multiple modules. This command displays the output of the display clock, display version, display device, and display current-configuration commands.

Save the operating statistics for each module of the router.

<Sysname> display diagnostic-information

Save or display diagnostic information (Y=save, N=display)? [Y/N]:y Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag Diagnostic information is outputting to cfa0:/aa.diag.

Please wait...

Recv slot 4 response packet.

Save successfully.

Execute the more aa.diag command in user view, and then press the Page Up and Page Down keys to view the contents of the file aa.diag.

Display the operating statistics for each module of the router.

<Sysname> display diagnostic-information

Save or display diagnostic information (Y=save, N=display)? [Y/N]:n

=================================================

===============display clock===============

=================================================

08:54:16 UTC Fri 15/06/2012

===================================================

===============display version===============

===================================================

Displaying detailed information about a card

Use the display device verbose command to display detailed information about all cards.

<Sysname>display device verbose

 

 

System-mode(Current/After Reboot): Normal/Normal

 

Slot No.

Board type

Status

Primary

SubSlots

---------------------------------------------------------------------

0

N/A

Absent

N/A

N/A

1

RSE-X2

Normal

Master

0

2

N/A

Absent

N/A

N/A

3

N/A

Absent

N/A

N/A

4

FIP-110

Normal

N/A

4

5

N/A

Absent

N/A

N/A

Slot 4 : FIP-110(4 Subslots)

 

 

 

Subslot 1 : MIM-2GBE

 

 

57