Figure 63 Pulling the FIP module out of the slot

4.Install a new FIP module. For the installation procedure, see "Installing an LPU." If you do not install a new FIP module in the slot, install a filler panel.

Replacing a HIM/MIM

The procedures for replacing HIMs and MIMs are similar. This example replaces a MIM to a FIP-210.

1.Face the front of the router and locate the MIM to be removed.

2.Use a flat-blade screwdriver to completely loosen the captive screws of the MIM.

3.Holding the handle of the MIM, gently pull the MIM out of slot along the slide rails.

Figure 64 Pulling the MIM out of the slot

4.Install a new MIM. For the installation procedure, see "Installing a HIM/MIM." If you do not install a new MIM in the slot, install a filler panel.

49