For the memory module specifications, see "Appendix A Chassis views and technical specifications."

Memory module structure

Figure 72 Memory module structure (DDR2)

(1)

Connector edge

(2) Polarization notch

(3)

Latch notch

 

Figure 73 Memory module structure (DDR3)

(1)

Connector edge

(2) Polarization notch

(3)

Latch notch

 

Replacing a memory module

The methods for replacing memory modules are similar. This example replaces a memory module on an RSE-X2.

To replace a memory module:

1.Pull the release latches away from the memory module at both ends so that the memory module is lifted from the memory module slot.

2.Holding the non-conductive edge, remove the memory module.

3.Align the polarization notch of the memory module with the key in the connector.

4.Insert the memory module into the slot.

54