NOTE:

•For a combo interface, the default operating port is the copper port. You can use either the copper port or the fiber port. To switch between the copper and fiber ports, use the combo enable { copper fiber } command in interface view. For more information about the combo enable { copper fiber } command, see HP HSR6800 Routers Interface Command Reference.

•Use transceiver modules for the fiber ports provided by HP only. The router might be incompatible with transceiver modules from other manufacturers. The system generates an alarm when a transceiver module from another manufacturer is installed.

FIP-600 combo interface specifications

Specification of combo interfaces on the FIP-600 and the FIP-110 are the same. For more information, see Table 34 and Table 35.

Transceiver modules for the FIP-600 and for the FIP-110 fiber ports are the same. For more information, see Table 36.

Maximum interface modules provided by FIP-600 in full configuration

FIP/Interface

HSR6802

HSR6804

HSR6808

module

 

 

 

FIP-600

2

4

8

 

 

 

 

MIM

Not supported

Not supported

Not supported

 

 

 

 

HIM

4

8

16

 

 

 

 

SAP-48GBE

SAP-48GBE front panel

Figure 96 SAP-48GBE front panel

(1)

LEDs for GE ports 0 to 47

(2)

SAP module status LED (RUN)

(3)

GE ports 0 to 47

(4)

Ejector lever

(5)

Captive screw

 

 

SAP-48GBE specifications

Table 38 SAP-48GBE specifications

Item

Remarks

Flash

4 MB

 

 

103