HP HSR6800 Router Connecting the power cord, Installing an air filter on an HSR6808, Connecting an AC power cord

Figure 19 Fastening the captive screws

Installing an air filter on an HSR6808

1.Face the front of the router.

2.Align the positioning pins on the air filter with the screw holes on the inlet vent area, and use a Phillips screwdriver to fasten the screws on the air filter.

Figure 20 Installing an air filter on an HSR6808

Connecting the power cord

Connecting an AC power cord

1.Make sure the router is well grounded, and the power switch on the router is in the OFF position.

2.Connect one end of the AC power cord to the AC receptacle on the router, and the other end to the AC power source.

3.Use cable ties to secure the power cord to the rack post.

20