HP I Dual Channel Ultra160 SCSI Host Adapter A6829A manual Firmware Jumper System Parameter, For

Installing the A6829A Adapter

Specifying SCSI Parameters

correct PDC version information, see the latest SCSI support matrix available at http://docs.hp.com under the Networking and Communications section.

Table 2-2	Ability to Set SCSI Parameters on HP-UX Systems
			Method for Setting Parameter
	HP-UX	SCSI	Firmware		Jumper
	System	Parameter		BCH	(for the
			Suggested
				Commands	Single
			Default
					Channel)
	a400 and	SCSI ID	✓	✓
	a500
		Maximum
	servers
		data	✓	✓
		transfer rate
		Auto term			✓
		state
		Bus width	✓
	l-class	SCSI ID	✓	✓
	servers
		Maximum
		data	✓	✓
		transfer rate
		Auto term			✓
		state
		Bus width	✓
	n-class	SCSI ID	✓	✓
	servers
		Maximum
		data	✓	✓
		transfer rate
		Auto term			✓
		state
		Bus width	✓

24 Chapter 2