HP I Dual Channel Ultra160 SCSI Host Adapter A6829A manual Pci

Installing the A6829A Adapter

Specifying SCSI Parameters

Adapter Properties
Adapter	PCI	PCI	PCI
	Bus	Device	Function
53C875	60	01	01

<Device Properties>
Boot Support	[Enabled]
SCSI Parity	[Yes]
Host SCSI ID	[ 5]
SCSI Bus Scan Order	[Low to High (0..Max)]
Spinup Delay (Secs)	[ 2]
Secondary Cluster Server	[Yes]
Termination Control	[Auto]
<Restore Defaults>

	Step	5. Use the arrow keys to highlight the Device Properties option, and press
		the [Enter] key. This displays the Device Properties screen; refer to the
		following example:
Device Properties
SCSI	Device Identifier			MB/Sec	MT/Sec	Data	Scan	Scan
ID						Width	ID	LUNs > 0
0	-			160	[80]	[16]	[Yes]	[Yes]
1	HP 18.2GST318406LC		HP05	160	[80]	[16]	[Yes]	[Yes]
2	HP 18.2GST318406LC		HP05	160	[80]	[16]	[Yes]	[Yes]
3	HP 18.2GST318406LC		HP05	160	[80]	[16]	[Yes]	[Yes]
4	-			160	[80]	[16]	[Yes]	[Yes]
5	-			160	[80]	[16]	[Yes]	[Yes]
6	53C1010-66			160	[80]	[16]	[Yes]	[Yes]
7	-			160	[80]	[16]	[Yes]	[Yes]
8	-			160	[80]	[16]	[Yes]	[Yes]
9	-			160	[80]	[16]	[Yes]	[Yes]
10	-			160	[80]	[16]	[Yes]	[Yes]
11	HP 18.2GST318406LC		HP05	160	[80]	[16]	[Yes]	[Yes]
12	HP 18.2GST318406LC		HP05	160	[80]	[16]	[Yes]	[Yes]
13	-			160	[80]	[16]	[Yes]	[Yes]
14	-			160	[80]	[16]	[Yes]	[Yes]
15	HP	A6491A	HP16	160	[80]	[16]	[Yes]	[Yes]

To change the bus width of the required device, use the arrow keys to highlight the corresponding option under the Data Width column, and then use the plus (+) or minus (-) keys to change the values.

50 Chapter 2