Installing the A6829A Adapter
Adding Multi-Initiator Support
Adding Multi-Initiator Support
In a multi-initiator configuration, multiple SCSI host bus adapters (HBA) are connected to the same SCSI bus. Multi-initiator is supported for A6829A HBAs having part number A6829A-60101 or higher.
Multi-initiator is not supported for HP A6829A SCSI HBA with part number A6829A-60001.
If you need multi-initiator support for an Itanium-based system, follow the steps mentioned in the section, “Multi-Initiator Support for Itanium‚-Based System” on page 57.
If you need multi-initiator support for a PA-RISC based system, follow the steps mentioned in the section, “Multi-Initiator Support for PA-RISC Based System” on page 57.
