Chapter 2

Cards and envelopes

Avoid envelopes that have a very slick finish, self-stick adhesives, clasps, or windows. Also avoid cards and envelopes with thick, irregular, or curled edges, or areas that are wrinkled, torn, or otherwise damaged.

Use tightly constructed envelopes, and make sure the folds are sharply creased.

Load envelopes with the flaps facing up.

Photo media

Use the Best mode to print photographs. Note that in this mode, printing takes longer and more memory is required from your computer.

Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack up may cause smearing.

Transparencies

Insert transparencies with the rough side down and the adhesive strip pointing towards the back of the device.

Use the Normal mode to print transparencies. This mode provides longer drying time and ensures that the ink dries completely before the next page is delivered to the output tray.

Remove each sheet as it prints and set it aside to dry. Allowing wet media to stack up may cause smearing.

Custom-sized media

Use only custom-sized media that is supported by the device.

If your application supports custom-sized media, set the media size in the application before printing the document. If not, set the size in the print driver. You might need to reformat existing documents to print them correctly on custom-sized media.

Understand specifications for supported media

Use the following tables to determine the correct media to use with your device, and determine what features will work with your media.

Understand supported sizes

Understand supported media types and weights

Understand supported sizes

NOTE: The HP Officejet J3600 supports all media listed in the table below. The HP Officejet J3500 supports paper only.

Type

Paper

Envelopes

Size

A4: 210 x 297 mm (8.3 x 11.7 inches)

Legal: 216 x 356 mm (8.5 x 14 inches)

B5–JIS: 182 x 257 mm (7.2 x 10.1 inches)

U.S. #10: 105 x 241 mm (4.13 x 9.5 inches)

22 Use the device

Page 26
Image 26
HP J3650, J3680 manual Understand specifications for supported media