To set the paper type for copies from the control panel

1.In the Copy area, press Copy Menu repeatedly until Paper Type appears.

2.Press until the appropriate paper type appears.

3.Press START COPY Black or START COPY Color.

Refer to the following table to determine which paper type setting to choose based on the paper loaded in the input tray.

Paper type

Copier paper or letterhead

HP Bright White Paper

HP Premium Plus Photo Paper, Glossy

HP Premium Plus Photo Paper, Matte

HP Premium Plus 10 x 15 cm (4 x 6 inch) Photo Paper

HP Premium or Premium Plus Inkjet Transparency Film

Other transparency film

Plain Hagaki

Glossy Hagaki

L (Japan only)

Control panel setting

Plain Paper

Plain Paper

Premium Photo

Premium Photo

Premium Photo

Transparency

Transparency

Plain Paper

Premium photo

Premium Photo

Change copy speed or quality

The device provides three options that affect copy speed and quality:

Best produces the highest quality for all paper and eliminates the banding (striping) effect that sometimes occurs in solid areas. Best copies slower than the other quality settings.

Normal delivers high-quality output and is the recommended setting for most of your copying. Normal copies faster than Best and is the default setting.

Fast copies faster than the Normal setting. The text is comparable to the quality of the Normal setting, but the graphics might be lower quality. The Fast setting uses less ink and extends the life of your print cartridges.

NOTE: The HP Officejet J3500 supports black and white copies on plain paper only.

To change the copy quality from the control panel

1.Make sure you have paper loaded in the input tray.

2.Load your original print side down in the document feeder tray. Place the pages so that the top edge of the document goes in first.

3.In the Copy area, press Quality until the appropriate quality setting is lit.

4.Press START COPY Black or START COPY Color.

Change copy speed or quality

39

Page 43
Image 43
HP J3680, J3650 manual Change copy speed or quality, To set the paper type for copies from the control panel, Paper type