HP recommends that you verify the number you are forwarding to is a working fax line. Send a test fax to make sure the fax machine is able to receive your forwarded faxes.
To forward faxes from the control panel
1.Press Setup.
2.Select Advance Fax Setup, and then select Fax Forwarding Black Only.
3.Press the right arrow button until
•Choose
NOTE: If the device is not able to forward the fax to the designated fax machine (for example, if it is not turned on), the device prints the fax. If you set up the device to print error reports for received faxes, it will also print an error report.
•Choose
4.At the prompt, enter the number of the fax machine that will receive the forwarded faxes.
5.At the prompt, enter a start time and date and a stop time and date.
6.Press OK.
Fax Forwarding appears on the
If the device loses power when Fax Forwarding is set up, it saves the Fax Forwarding setting and phone number. When power is restored to the device, the Fax Forwarding setting is still On.
NOTE: You can cancel fax forwarding by pressing Cancel on the control panel when the Fax Forwarding message is visible on the display, or you can select Off from the Fax Forwarding Black Only menu.
Set the paper size for received faxes
You can select the paper size for received faxes. The paper size you select should match what is loaded in your input tray. Faxes can be printed on letter, A4, or legal paper only.
NOTE: If an incorrect paper size is loaded in the input tray when you receive a fax, the fax does not print and an error message appears on the display. Load letter, A4, or legal paper, and then press OK to print the fax.
To set the paper size for received faxes from the control panel
1.Press Setup.
2.Press 4, and then press 4.
This selects Basic Fax Setup and then selects Fax Paper Size.
3.Press 
to select an option, and then press OK.
Set automatic reduction for incoming faxes
The Automatic Reduction setting determines what the HP
Receive a fax | 59 |