HP M1217NFW CE844A#BGJ manual Redial pending, Fax memory full, Canceling recv

Control panel message	Description	Recommended action
Fax is busy	The fax line to which you were sending a fax	Allow the product to retry sending the fax.
Redial pending	was busy. The product automatically redials	Call the recipient to ensure that the fax
	the busy number.
		machine is on and ready.
		Check that you are dialing the correct fax
		number.
		Check for a dial tone on the phone line by
		pressing the Send Fax	button.
		Make sure that the phone is working by
		disconnecting the product, plugging in a
		telephone to the phone line, and making a
		voice call.
		Plug the product phone cord into a jack for
		another phone line, and try sending the fax
		again.
		Try a different phone cord.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
Fax memory full	During the fax transmission, the product ran	Print all of the faxes, and then have the
Canceling recv.	out of memory. Only the pages that fit into	sender resend the fax. Have the sender
	memory will be printed.	divide the fax job into multiple jobs before

resending. Cancel all fax jobs or clear the faxes from memory.

Fax memory full Canceling send

During the fax job, the memory filled. All pages of the fax have to be in memory for a fax job to work correctly. Only the pages that fit into memory were sent.

Print all received faxes or wait until all pending faxes are sent.

Ask the sender to send the fax again.

Cancel all fax jobs or clear the faxes from memory.

140 Chapter 10 Fax (M1210 Series only) ENWW