3.Clean the scanner glass and the white plastic backing with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass or platen. They might seep and damage the product.

4.Dry the glass and white plastic with a chamois or a cellulose sponge to prevent spotting.

5.Plug in the product, and then use the power switch to turn on the product.

Adjust the lightness or darkness for copies

Adjust the lightness or darkness for copies (M1130 Series)

1.Press the Setup button repeatedly until the Lighter/Darker light is on.

2.Use the arrow buttons to increase or decrease the Lighter/Darker setting.

NOTE: The setting returns to the default value after two minutes.

92 Chapter 8 Copy

ENWW

Page 106
Image 106
HP M1217NFW CE844A#BGJ manual Adjust the lightness or darkness for copies