Store fax now?While scheduling a fax, you are
1=Yes 2=Noprompted to 1) store the document in memory for sending later, or 2) place the document in the fax loading tray until the designated start time.
If you want to store the fax in memory until the start time, press 1. If you don't want to use up the memory, or if you don't think your document will fit into memory, press 2 and place your document in the fax loading tray before the start time.
Stored data lost | Settings that were stored are lost. |
Call for service | All settings are returned to the |
| factory defaults. |
You can continue to use your HP OfficeJet, but the battery may be discharged. You should call for service at your convenience. See "Whom to call " earlier in this chapter.
Stored data lost | Settings that were stored are lost. |
Check Settings | All settings are returned to the |
| factory defaults. |
You can continue to use your HP OfficeJet, but you should call for service at your convenience. See "Whom to call if you're in the United States" or "Whom to call" earlier in this chapter.
Storing. . .You are storing a document in
Memory used: xx% memory to be faxed later, or to be sent to a group of fax numbers. The bottom line shows you how much of the memory is being used to store the document. A total of about 24 pages (400 KB) of memory is available for faxing and copying.
Wait until the storing is complete, to make sure your document will fit into the available memory. If your document is too large for the available memory, a message will tell you what to do next.