4.Open the print cartridge box and container, then grasp the print car` tridge by the green top and remove the cartridge from the container. Gently remove both pieces of tape`blue and white`covering the ink nozzles and vent hole.

CAUTIONS: 1) If you don't remove the white tape, you deplete the ink in the cartridge prematurely. 2) Be care` ful not to touch the ink nozzles or the copper contacts. Fingerprints may damage them.

Remove both pieces of tape!

5. Place the print cartridge down into the cradle as shown. Align the green arrow on the cartridge top with the green dot on top of the cradle.

sl-42

6. Push the green arrow toward the green dot until the cartridge snaps into place.

sl-43

7. Close the top cover, then close the front panel.

Be sure to close the front panel firmly, until both corners snap into place.

sl-30b

￿￿￿￿