The print

The ink nozzles of the

cartridge has

print cartridge are

dried ink on the

clogged.

"nose."

 

1.Press the Clean Pen button and wait about 15 seconds while the ink nozzles are cleaned automatically. Then print the Self Test report (see instructions in chapter 2). Check the two print cartridge test patterns in the Self Test report. If the diagonal line has white gaps in it, or if the area fill has horizontal white lines in it, continue with step 2; otherwise, stop here and continue printing normal` ly.

2.Remove the print cartridge. (For help, see the instructions in "Changing the Print Cartridge" later in this chapter.) Hold the print cartridge by the green top with the "nose" pointed toward your waste can. Use an index card or other rigid paper to scrape the dried ink from the nozzles into the waste can (see il` lustration below). Then use a lint-free damp cloth to gently clean the ink nozzles. Reinstall the print cartridge and print the Self Test report again. Check for white gaps and white lines again. If you find any, continue with step 3; otherwise, stop here and continue print` ing normally.

sl-62

￿￿￿￿