CHANGE USER

CHANGE USER

Use the CHANGE USER command to c hange a user pro￿le in the NETUsers ￿le on the server.

CHANGE USER can be abbreviated to CU.

To issue this command, y ou must log on as MANA GER.SYS, have SM capability, or have AM capability for the account speci￿ed in the command.

NETUtil Syntax

netutil=> CHANGE USER

Client Node Name(current value): ClientNodeName

Client Node Name (new value) (opt): ClientNodeName

Client Login Name (current value): ClientLoginName

Client Login Name (new value) (opt): ClientLoginName

Server Login Name (current value): ServerLoginName

Server Login Name (new value) (opt): ServerLoginName

Change Profile (y/n)? ￿ y2 es 3 ￿ n2 o 3

Parameters

ClientNodeName is the client node name of the user pro￿le y ou want to change.

It follows the node naming con ventions of the datacomm services used by the client node. The client node name is not case-sensitiv e and is stored and displa yed exactly as it w as entered.

ClientLoginName is either the login name of the user on the clien t or an asterisk (*).

The MPE/iX client login name follows MPE/iX naming con ventions for a login name and is not case-sensitiv e. The session name is not allowed and the group name is required. (F or guidelines on specifying session and group names in the serv er login name, refer to \Setting Up ALLBASE/NET on the Serv er" in the \Setting Up ALLBASE/NET" chapter.

The HP-UX client login name follo ws HP-UX naming conventions for a login name, cannot exceed eigh t characters in length, and is case-sensitive.

Refer to the ADD USER command for details on wildcarding the client login name.

The client login name is stored and displa yed exactly as it w as entered.

If you enter an asterisk, all clien t node names in the NETUsers ￿le that match the current client node name are changed to the new clien t node name.

NETUtil Reference 4-9