The following panels are on the exterior of the HP POD.
Item | Component | Description |
|
|
|
1 | Electrical busway enclosed | 400A enclosed circuit breakers that powers the electrical |
| circuit breaker (on page 36) | busways: |
|
| • Two electrical busway panels are activated in the |
|
| standard HP POD. |
|
| • Three electrical busway panels are activated in the high |
|
| density HP POD. |
|
|
|
2 | EPO panel (on page 36) | Contains controls and status indicators for the EPO system |
|
|
|
3 | Fire alarm panel ("Fire alarm | Contains controls and status indicators for the fire alarm |
| control panel" on page 38) | system |
|
|
|
4 | ASSD panel (on page 36) | Air sampling smoke detection system |
|
|
|
5 | EPO button | Cuts off all power to the POD and activates the EPO alarm |
|
| lamp. |
|
|
|
6 | Security panel ("Security panel | Reserved for installing interface and power requirements for |
| any optional security devices installed. | |
|
|
|
7 | EPMS panel∗ ("EPMS panel" | Electrical power monitoring system |
| on page 38) |
|
|
|
|
8 | Humidifier ("Humidifier | Maintains the humidity inside the HP POD within a set range |
| (optional)" on page 44)* | to minimize static electricity. |
|
|
|
9 | Auxiliary Land power* | Provides auxiliary power for the BMS or convenience outlets. |
|
| 120V |
|
|
|
10 | BMS panel (on page 36) | Building Management System |
|
|
|
11 | Fan control (FC) panel ("Fan | Circuit breakers that control the fan units |
| control panel" on page 38) |
|
|
|
|
12 | House panel (on page 38) | 120A electrical panel board providing auxiliary HP POD |
|
| electrical requirements |
|
|
|
13 | Junction Box | Main input box for incoming electrical feeder cables |
|
|
|
∗Optional component |
| |
Power management 35