Table 9-1 Numeric Codes and Text Messages (continued)
Control panel message | Description | Recommended action | |
|
|
|
|
Error occurred during MEBx execution | 1. | Reboot the computer. | |
| which fails into the “General” grouping. | 2. | If the error persists, update to the latest |
| Status information displayed along with the | ||
| error provides further clarity into the failure. |
| BIOS version and ME firmware |
| MEBx handles transference of information |
| version. |
| between the system BIOS and ME | 3. | If the error still persists, replace the |
| firmware. | ||
|
|
| system board. |
|
|
|
|
Error occurred during MEBx execution | 1. | Reboot the computer. | |
| which fails into “ME” grouping. | 2. | If the error persists, update to the latest |
|
| ||
|
|
| BIOS version and ME firmware |
|
|
| version. |
|
| 3. | If the error still persists, replace the |
|
|
| system board. |
|
|
|
|
Error occurred during MEBx execution | 1. | Reboot the computer. | |
| which fails into “AMT” grouping. | 2. | If the error persists, update to the latest |
|
| ||
|
|
| BIOS version and ME firmware |
|
|
| version. |
|
| 3. | If the error still persists, replace the |
|
|
| system board. |
|
|
|
|
Error occurred during MEBx execution | 1. | Reboot the computer. | |
| which fails into “MEI or HECI” grouping. | 2. | If the error persists, update to the latest |
|
| ||
|
|
| BIOS version and ME firmware |
|
|
| version. |
|
| 3. | If the error still persists, replace the |
|
|
| system board. |
Special system configurations with reduced | |
| ME firmware image require BIOS control of |
| ME firmware upgrading. A failure has |
| occurred after the ME firmware update |
| process in which the BIOS could not relock |
| the ME firmware region. |
1.Reboot the computer.
2.If the error persists, update to the latest BIOS version and ME firmware version.
3.If the error still persists, replace the system board.
Special system configurations with reduced | |
| ME firmware image require BIOS control of |
| ME firmware upgrading. A failure has |
| occurred prior to the ME firmware update |
| process in which the BIOS could not unlock |
| the ME firmware region. |
1.Reboot the computer.
2.If the error persists, update to the latest BIOS version and ME firmware version.
3.If the error still persists, replace the system board.
Invalid Electronic Serial Number | Electronic serial number is missing. | Enter the correct serial number in Computer |
|
| Setup. |
|
|
|
