HP Pro QV985AV manual System Security

Table 3-4Computer Setup—Security (continued)

System Security	Data Execution Prevention (enable/disable) - Helps prevent operating system security breaches.
(these options are	Default is enabled.
hardware dependent)	SVM CPU Virtualization (enable/disable). Controls the virtualization features of the processor.
	Changing this setting requires turning the computer off and then back on. Default is disabled.
	Virtualization Technology (VTx) (enable/disable) - Controls the virtualization features of the
	processor. Changing this setting requires turning the computer off and then back on. Default is
	disabled.
	Virtualization Technology Directed I/O (VTd) (enable/disable) - Controls virtualization DMA
	remapping features of the chipset. Changing this setting requires turning the computer off and
	then back on. Default is disabled.
	Trusted Execution Technology (enable/disable) - Controls the underlying processor and chipset
	features needed to support a virtual appliance. Changing this setting requires turning the
	computer off and then back on. Default is disabled. To enable this feature you must enable the
	following features:
	● Embedded Security Device Support
	● Virtualization Technology
	● Virtualization Technology Directed I/O
	Embedded Security Device (enable/disable) - Permits activation and deactivation of the
	Embedded Security Device.
	NOTE: To configure the Embedded Security Device, a Setup password must be set.
	● Reset to Factory Settings (Do not reset/Reset) - Resetting to factory defaults will erase all
	security keys and leave the device in a disabled state. Changing this setting requires that
	you restart the computer. Default is Do not reset.
	CAUTION: The embedded security device is a critical component of many security
	schemes. Erasing the security keys will prevent access to data protected by the Embedded
	Security Device. Choosing Reset to Factory Settings may result in significant data loss.
	● Measure boot variables/devices to PCR1 - Typically, the computer measures the boot path
	and saves collected metrics to PCR5 (a register in the Embedded Security Device). Bitlocker
	tracks changes to any of these metrics, and forces the user to re-authenticate if it detects
	any changes. Enabling this feature lets you set Bitlocker to ignore detected changes to boot
	path metrics, thereby avoiding re-authentication issues associated with USB keys inserted in
	a port. Default is enabled.
System Security	OS management of Embedded Security Device (enable/disable) - This option allows the user to
(continued)	limit OS control of the Embedded Security Device. Default is enabled. This option is automatically
	disabled if Trusted Execution Technology is enabled.
	● Reset of Embedded Security Device through OS (enable/disable) - This option allows the
	user to limit the operating system ability to request a Reset to Factory Settings of the
	Embedded Security Device. Default is disabled.
	NOTE: To enable this option, a Setup password must be set.
	● No PPI provisioning (Windows 8 only) - This option lets you set Windows 8 to bypass the PPI
	(Physical Presence Interface) requirement and directly enable and take ownership of the
	TPM on first boot. You cannot change this setting after TPM is owned/initialized, unless the
	TPM is reset. Default is disabled for non-Windows 8 systems, and enabled for Windows 8.
	● Allow PPI policy to be changed by OS. Enabling this option allows the operating system to
	execute TPM operations without Physical Presence Interface. Default is disabled.
	NOTE: To enable this option, a Setup password must be set.

Computer Setup (F10) Utilities 19