![](/images/new-backgrounds/1330436/330436295x1.webp)
Solving General Problems
You may be able to easily resolve the general problems described in this section. If a problem persists and you are unable to resolve it yourself or if you feel uncomfortable about performing the operation, contact an authorized dealer or reseller.
WARNING! When the computer is plugged into an AC power source, voltage is always applied to the system board. To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet and allow the internal system components to cool before touching.
Table 8-1 Solving General Problems
Computer appears locked up and will not turn off when the power button is pressed.
Cause | Solution |
Software control of the power switch is not functional.
1.Press and hold the power button for at least four seconds until the computer turns off.
2.Disconnect the power cord from the electrical outlet.
Computer will not respond to keyboard or mouse.
Cause | Solution |
Computer is in Sleep state.
To resume from Sleep state, press the power button.
CAUTION: When attempting to resume from Sleep state, do not hold down the power button for more than four seconds. Otherwise, the computer will shut down and you will lose any unsaved data.
System has locked up. | Restart computer. |
|
|
Computer date and time display is incorrect. |
|
|
|
Cause | Solution |
|
|
RTC | Reset the date and time under Control Panel (Computer |
NOTE: Connecting the computer to a live AC outlet | Setup can also be used to update the RTC date and time). If |
the problem persists, replace the RTC battery. See the | |
prolongs the life of the RTC battery. | Removal and Replacement section for instructions on |
| installing a new battery, or contact an authorized dealer or |
| reseller for RTC battery replacement. |
| To access Control Panel in Windows 7, select Start, and |
| then select Control Panel. |
| To access Control Panel in Windows 8, from the Start |
| screen, type c, and then select Control Panel from the list of |
| applications. |
|
|
Solving General Problems 139