4.Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the open position.

Figure 6-7Opening the Expansion Slot Retainer

5.Before installing an expansion card, remove the expansion slot cover or the existing expansion card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.

a.If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis.

Figure 6-8Removing an Expansion Slot Cover

64 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis

Page 73
Image 73
HP Pro QV985AV manual