Media Input

Options

Removing the Paper Feeder

If you installed the paper feeder before the cassette supporter, you must first remove the paper feeder to install the cassette supporter.

Remove the paper feeder from the printer as follows (referring to the illustrations in the previous section if necessary):

1Turn off the printer, and disconnect the power cord and all interface cables.2Remove the paper cassettes from the printer.3Remove the paper feeder from the printer.

Follow, in reverse order, the steps in the “Installing the Paper Feeder” section of this chapter. The following is a quick overview of the procedure:

a Remove the connector cover.

b Unplug the paper feeder's connector cable.

c Unlock the green lock levers on the paper feeder (pull them toward you).

d Lift the printer off the paper feeder.

e If you are installing a cassette supporter, refer to “Installing the Cassette Supporter,” later in this chapter.

Otherwise, continue with step f.

fReplace the connector cover.

gReconnect the power cord and interface cables. Then turn on the printer and reinstall the paper cassette.

Printer Options

6-9