HP QMS 1660 manual 94

Special Pages

Notes	If you used the Administration/Engine/Inputbin x Name options
	to change the names of the inputbins, these names replace
	Multipurpose, Lower, and Optional in the message window.

Enabling/Disabling the SYS\START File

If you have a hard disk and Do Sys Start is enabled, when the printer is turned on, the controller checks the hard disk for a PostScript file named SYS\START and executes this file. This file does not print.

Menu	Administration/Startup Options/Do Sys Start
Choices	Yes—Check the hard disk for and execute the SYS\START file
	when the printer is turned on.
	No—Don’t check the hard disk for a SYS\START file.
Default	Yes

Loading the PostScript Error Handler

You have the option of loading Error Handler, a diagnostic tool that allows you to identify PostScript errors encountered during a print job. Refer to the PostScript Language Reference Manual (Adobe Systems Incorporated, Reading, PA: Addison-Wesley, 1990, ISBN 0- 201-18127-4) for more information on PostScript errors.

Menu	Administration/Startup Options/Do Error Handler
Choices	Yes—Load the Error Handler.
	No—Don’t load the Error Handler.
Default	You must turn the printer off and on again for this option to take
	effect.

Special Pages

Use the Administration/Special Pages menu to print special pages, such as status pages, calibration pages, header pages, and trailer pages.

4-62 QMS 1660 Print System Reference