HP QMS 1660 Notes, Range, Range, Notes, Syntax, Purpose, Purpose, Purpose, Variable, font name, object code, Format Integer, %%IncludeFeature:font (font name)

Updated DOC

Commands

Notes If no resource item is provided, the internal default location is used; otherwise, this parameter, which must be provided, specifies one of the alternate locations. For most QMS printers, resource 6 is the system disk.

object code

Purpose Assigns a code to an object such as a font, macro, or pattern.

Range 0-32767

Range 0

Format Integer

Select Font Command

Syntax	%%IncludeFeature:font (font name)
Purpose	Specifies the default font to use.
Notes	Fonts are identified by the names shown above. Only the
	resident fonts may be selected (the available set varies from
	printer to printer). An asterisk “*” in the name indicates that a
	font is scalable, and that a point size is to be applied. The value
	selectbyid indicates that the default font ID or unique font index
	will be used for default font selection. Selecting a bound, bitmap
	font overrides the default settings for symbol set and point size.
	An unbound font uses the specified default symbol set if
	possible, while a scalable font uses the default font size.
Variable	font name
	Purpose	Specifies the default font name.

Document Option Commands C-15