Font and

Security Cards

2 Insert the font card.

You can use either slot, but the card must be inserted with the QMS label side facing up. You should feel the card snap into place.

3Depending on the type of card you are installing, either turn on the printer again or press the Online/Offline key to put the printer back on line.

The fonts are now ready to be used.

»Note: If you’re using a font card, you should also make sure that the printer driver you have installed for each application supports the fonts on the card. If it doesn’t, contact your application manufacturer for support.

Removing a Font Card

Use the following procedure to remove a font card:

1If you are using an HP ProCollection font card, turn off the printer.

Otherwise, press the Online/Offline key to take the printer off line.

2Pull out the card gently.

3Depending on the type of card you are removing, either turn on the printer again or put it back on line.

6-18

QMS 1660 Print System Reference