Kanji Option

Kit

Kanji Option Kit

The QMS Kanji Option Kit contains a pre-formatted IDE hard disk that contains Kanji fonts and other files. The Kanji fonts include Ryumin Light-KL and Gothic BBB-Medium (licensed to QMS by Morisawa and Company, Ltd.) as well as Mincho Medium, Mincho Heavy, Gothic Bold, and Gothic Heavy (licensed to QMS by TypeBank). These fonts can be printed at a variety of point sizes and in different styles and resolutions.

Three steps are involved in setting up and using the Kanji fonts:

nInstall an optional IDE-SCSI board (if necessary) and the Kanji internal IDE hard disk

nConfigure the printer for Kanji

nAccess the Kanji fonts

Once you have performed these three steps, the six Kanji fonts are available for use just as if they were resident in the printer.

»Note: Before beginning this procedure, have available the QMS Crown Kanji Option Installation Instructions, included in the Kanji Option Kit.

Installing the IDE-SCSI Board and the Kanji Internal IDE Hard Disk

Use the instructions in the previous section, “Storage Options,” to install the IDE-SCSI board and the Kanji internal IDE hard disk.

Keep the following considerations in mind:

nEnsure that your printer is already installed, configured, and tested for proper operation before installing the Kanji hard disk.

nIf you already have an IDE-SCSI board installed in the printer, you do not need to purchase another board on which to install the Kanji hard disk.

However, you do have to remove the IDE-SCSI board from the printer before you can install the hard disk. If you have an IDE

Printer Options

6-61