HP QMS 1660 manual 196

Storage

Options

window (DSK refers to the hard disk number, and CAR0 and CAR1 refer to the font card slot number).

»Note: You may need to press the Next key one or more times to advance through the list of selections or options.

Key	Purpose	Message
Select	Accesses the Administration/Disk	DISK OPERATIONS
	Operations/Install Option menu.	INSTALL	OPTION
Select	Accesses the Format Disk/Dsk#: menu.	INSTALL	OPTION
		DSK#: x
Next	Scrolls through the list of attached	FORMAT DISK
	disks.	DSK: x
Select	Selects the disk and accesses the card	INSTALL	SOURCE
	address from which the optional font is	CAR#: x
	being installed.
Select	Prompts you to insert the font card in	INSTALL	OPTION
	one of the card slots below the printer’s	INSERT MEDIA
	media cassette.
	Begins reading data from the card and	INSTALL	OPTION
	installing the appropriate files on the	READING	DATA...
	hard disk This usually takes several
	minutes.
	Acknowledges completion of the	INSTALL	OPTION
	installation process.	INSTALL	COMPLETE
Menu	Exits from the Install Option menu and	DISK OPERATIONS
	returns to the Disk Operations menu.	INSTALL	OPTION

After the option is installed, remove the card from the slot and place the printer back on line.

Removing an Optional Font

Use the Administration/Disk Operations/Remove Option to remove optional fonts from your hard disk. You need the original font card containing the files. The Remove Option compares the contents of the card against the contents of the hard disk and then deletes the matching files from the hard disk.

6-58 QMS 1660 Print System Reference