Storage

Options

3Attach the hard disk to the IDE-SCSI board.

Align the hard disk with the 2.5” hard disk outline on the IDE- SCSI board. The screw holes in the bottom of the hard disk should match up with the holes in the board.

Fasten the hard disk to the board with the four screws provided in the kit.

4Return to “Installing an IDE-SCSI Board,” earlier in this chap- ter.

Removing an Internal IDE Hard Disk

Use the following instructions if you need to remove an internal IDE hard disk (for example, if you have an IDE hard disk and you need to remove it to install a Kanji IDE hard disk.

Illustrations are not included with this procedure. However, you can use the appropriate illustrations in the previous section, “Installing an Internal IDE Hard Disk.”

1Refer to a previous section, “Removing an IDE-SCSI Board,” for instructions on accessing the IDE-SCSI board.

You will be returned to this procedure at the appropriate point.

6-52

QMS 1660 Print System Reference