HP QMS 1660 Notes, Range, Notes, Range, Syntax, Format, Purpose, Purpose, Default, Purpose, Default, Variables, object id, resource id

		Updated DOC
		Commands
Remove Resource Command
Syntax	%%IncludeFeature:removeresource(resource id object id)
Purpose	Identifies an external object that is to be removed from the
	printer system.
Notes	This is an obsolete DOC command that is identical to the
	remove command, except that it does not allow specification of
	an object type. The DOC string “removeresource(aaa bbb)” is
	equivalent to “remove(aaa bbb *)”.
Variables	resource id
	Purpose	Indicates the resource from which the object is to be
		removed.
	Range	0-6
	Default	N/A
	Format	Integer
	Notes	This ID must be specified. It indicates the resource
		from which the desired object is to be removed.
		There is no way to specify “all resources.” If a
		%%IncludeFeature:install command precedes the
		%%IncludeFeature:remove command, the
		remove command is ignored (these commands are
		mutually exclusive). If the disk does not exist, PCL
		issues the NO SPACE FOR FONT, MACRO, OR
		PATTERN error message.
	object id
	Purpose	Specifies the ID of the object that is to be removed
		from the printer system.
	Range	*, -1 to 32767
	Default	-1 (wildcard)

Document Option Commands C-13