HP QMS 1660 manual 93

Printer Start-Up

Options

The Energy Saver option specifies whether the printer changes to a low-power state (the engine remains on, but the fuser turns off) after a specified period of inactivity. When a print job is received, the printer begins processing it in the background and returns to normal power within 90 seconds.

Menu	Administration/Engine/Energy Saver
Choices	15 Min—Use lower power after 15 minutes of inactivity.
	30 Min—Use lower power after 30 minutes of inactivity.
	1	Hour—Use lower power after 1 hour of inactivity.
	2	Hours—Use lower power after 2 hours of inactivity.
	3	Hours—Use lower power after 3 hours of inactivity.
	Off—Use normal power all of the time.
Default	1 Hour

Printer Start-Up Options

The Administration/Startup Options menu allows you to configure your printer to run certain options automatically when you turn it on.

Enabling/Disabling the Start-Up Page

By default, the printer prints a start-up page when you turn it on. The start-up page lists basic information about the printer, such as its name, the PostScript emulation level and version, and various printer settings. However, you can turn the start-up page off to conserve paper and toner.

Menu	Administration/Startup Options/Do Start Page
Choices	Yes—Print a start-up page each time the printer is turned on.
	No—Don’t print a start-up page each time the printer is turned
	on.
Default	Yes

Printer Configuration 4-61