Memory

Emulation

The K Mem Emulation memory client is the number of kilobytes of RAM to be used by non-PostScript emulations for temporary storage and for loading optional emulations. If you receive an emulation error, you may need to increase the amount of memory for this client.

Menu

Administration/Memory/K Mem Emulation

 

 

Choices

00768-08192

 

 

Default

00848

 

 

Notes

If you change the K Mem Emulation value, the printer

 

automatically restarts after you save your changes and exit

 

from the configuration menu.

 

 

Emulation (Temporary)

The K Mem Emul Tmp memory client is the number of kilobytes of RAM to be used by non-PostScript emulations for storing downloaded (soft) fonts, forms, or macros. Data in this client disappears when the printer is turned off. This client is listed as Temporary on the status page. Increasing this client's size increases the number of PCL downloaded fonts which can be accepted.

Menu

Administration/Memory/K Mem Emul Tmp

 

 

Choices

00256-08192

 

 

Default

00256

 

 

Notes

This value must be greater than the sum of the Min K Spool for

 

all installed and enabled interfaces.

 

If you change the K Mem Emul Tmp value, the printer

 

automatically restarts after you save your changes and exit

 

from the configuration menu.

 

 

Enable Disk Swap

The Enable Disk Swap memory client gives your printer virtual memory capability for all memory clients through the creation of a “swap file” on the printer’s hard disk. The default size of the swap file depends on the amount of RAM installed. The more RAM installed,

Printer Configuration

4-49