Media Input

Options

Removing the Cassette Supporter

If you find it necessary to remove the cassette supporter from the printer, use the following procedure (referring to the illustrations in the previous section, if necessary):

1Turn off the printer, and disconnect the power cord and all interface cables.

2Remove the paper cassettes from the printer.

3Remove the paper feeder from the printer.

Follow the steps in the “Removing the Paper Feeder” section ear- lier in this chapter.

4Remove the cassette supporter from the paper feeder.

Follow, in reverse order, the steps in the “Installing the Cassette Supporter” section of this chapter. The following is a quick over- view of the procedure:

a Pull the lock buttons on the cassette supporter that lock it to the paper feeder.

b Take the paper feeder off the cassette supporter. c Push the lock buttons in on the cassette supporter. d Reconnect the interface cables and power cord. e Turn on the printer.

500-Sheet Paper Cassette

Once you have installed a paper feeder and a cassette supporter, you can use a 500-sheet paper cassette to increase your printer’s total paper-feed capacity to 850 sheets.

»Note: 500-sheet cassettes support only letter/A4-size media.

Loading the 500-Sheet Paper Cassette

To ensure that all 500 sheets fit in the cassette and that the paper stack is properly leveled out, use the following procedure to load the 500- sheet paper cassette:

Printer Options

6-13