Replacing the

Printer and

Controller

Board Covers

6Remove the control board cover.

a Remove and set aside the 15 screws on the metal controller board cover.

b Remove the metal cover and set it aside.

Replacing the Printer and Controller Board Covers

The printer and controller board covers must be reinstalled after a SIMM or an optional network interface is installed.

Caution: It's very important to protect the printer controller board from electrostatic damage while performing this task. Review the anti- static guidelines in the “Removing the Printer and Controller Board Covers” section, earlier in this chapter.

6-24

QMS 1660 Print System Reference