Manuals / Brands / Computer Equipment / Printer / HP / Computer Equipment / Printer

HP QMS 1660 Note:, Caution, 1Connect one end of the plastic ribbon cable to the hard disk

1 306

Download 306 pages, 1.59 Mb

Storage

Options

»Note: Before installing an internal IDE hard disk, you must have an optional IDE-SCSI board.

If you’re installing an optional IDE-SCSI board for the first time, refer now to “IDE-SCSI Board,” earlier in this section, for installation instructions. You will be referred to these instructions at the appropriate time.

If the IDE-SCSI board is already installed, you must remove it before you can install an internal hard disk. Refer to the same section for information on removing the board.

1Connect one end of the plastic ribbon cable to the hard disk.

Align the colored stripe on the cable with pin 1 on the hard disk connector, and then slowly push the cable onto the connector.

▲Caution: The plastic ribbon cable is fragile. Handle it gently.

Pin 1

6-50	QMS 1660 Print System Reference

Contents

QMS® Print System Reference Page Contents Media Storage About Typefaces and Fonts Resident Fonts, Typefaces, and Symbol Sets Optional Fonts Methods of Configuration Hard Disks Media Input Media Orientation Media Output Media Size Passwords Printer Engine Features Printer Start-UpOptions Timeouts Printer-HostCommunication Gamma Correction, Halftones, and Screens Parallel Interface Modes PS Protocol Option HP-GLColor Encoding Media Input Options Paper Output Ramp Font and Security Cards Removing the Printer and Controller Board Covers Replacing the Printer and Controller Board Covers Single In-LineMemory Modules Updating System Software Sources of Support A-2 QMS World-wideOffices A-5 Printer Options B-12 Consumable Supplies Warranty Considerations B-13 Page Page Introduction 1Introduction 2Print Media Professional Printing Printer Configuration Additional Technical 6Printer Options QMS Customer ASupport Technical B Specifications lowercase bold Note: Caution WARNING Print Media Page translate scale Page Multipurpose tray Paper cassettes Page Professional Printing Times Bold Times Bold Italic Page Page Page Page Page ITC Bookman Demibold Palatino Bold ITC Bookman Demibold Italic Palatino Bold Italic New Century Schoolbook Bold Courier 12 pitch 10 point Bold Times Bold (scalable) Times Italic Bold (scalable) Courier 10 pitch 12 point Bold Page Printer Configuration Page Page Page nAdministration Menu nInstallation Menu nOperator Control Menu Page Page Page Page Page Choices Default Notes Page Page Page Page Page Default 7550A Page Page Page Page Default Enable Default Roman-8 Default ASCII Page Page Default Portrait Page Page Page Page Page Page Default Normal Default ESP Default None Page Page Page Page Defaults Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page Page With this and this ...adjust this control to move the image feed orienta Page Page Page Page Standard Advanced Note Page Page Page Page Additional Technical Information Page Page Page Halftone Types Basic setscreen setgray At the Printer In Your QuarkXPress Document (Page Setup Dialog Box) Page Page Page Page Page Page Page Page Minimum Frame Buffer Size for Imageable Area Minimum Frame Buffer Size (in KB) Page Page Page Page Page Location Size Page Page 1Set the end job mode from the printer's control panel 2Add the EOD command to your file Page Page Page Command Explanation Page Page Page Choices Name and Description Page Page CMYK Value Page Printer Options Page Standard Dual cassette with paper feeder Dual cassette with paper feeder and cassette supporter Page Page Page Page Page 1Turn off the printer, and disconnect the power cord and all interface cables 2Remove the paper cassettes from the printer 3Remove the paper feeder from the printer Page Page Page 4Remove the cassette supporter from the paper feeder Page Page Page Page Page 1Take the printer off line 2Insert the security card 3Select the password 4Enable the password 5 Put the printer back on line Page Page Page 6Remove the control board cover Page Page 1Access the printer controller board 2Position the controller board so the interface panel is on your right 3Remove the SIMM from the anti-staticbag 4Insert the SIMM into the SIMM connector 5Tilt the SIMM forward to a 90° angle until you feel it snap into place 6Repeat steps 3-5for each additional SIMM being installing 7Replace the printer and controller board covers 3Release the SIMM Page Page 3Locate the appropriate PROM sockets 4Gently work each PROM into its socket 5Check your PROM installation If your printer has more than 12 MB of RAM, the size of the disk Page Font Pi Sans Script Serif 1 Access the Administation/PCL5/Default Font menu 2 Choose the Select by Index option 3 Access the Administration/PCL5/Default Font Idx menu 4 Identify the appropriate font selection index 5 Save your changes and put the printer back on line Page Page Page Page Page Page Page Page Page Page Page 1Connect one end of the plastic ribbon cable to the hard disk 2Connect the other end of the cable to the IDE-SCSIboard Page Page Page Page Page Page Page Page Page Page Page 1Choose the appropriate compressed system software files 2Install the system software on your computer 3Download the system software to the printer 2Create a new folder (Macintosh) or directory (PC) on your computer 4Install the files on your computer’s hard disk Page nUNIX 5Download the system software to the printer Page Page Page Page Page Page Page Page Page Page Page Page QMS Customer Support Page Page (x2530) United States Latin America Asia-Pacific Canada Europe, Middle Page Technical Specifications Engine Duty Cycle (maximum) Print Method Print Speed Fonts Type Frequency Power Requirements Consumption Noise Level Dimensions Weight Delivery Feed Paper cassette Page Signal Pin No Signal Description Direction Direction Return Pin Name Pinout View from Printer Interface cable Page Hard Disks— Internal IDE External SCSI Paper Cassette Supporter Page Page Document Option Commands Page Page Page %%IncludeFeature: resource nTemporary nPermanent nExternal %%Include- Feature:install Syntax %%IncludeFeature:scalablefonts(value) Variable value Syntax %%IncludeFeature:install(resource id object id) Variables resource id If no %%IncludeFeature:install DOC command object id Format %%IncludeFeature:remove command precedes a %%IncludeFeature:install %%IncludeFeature:install Examples Example A—Job1 Example A—Job2 <ESC>(8U<ESC>(s1p12v0s0b4153This text B—Job2 will be in the downloaded font, if it supports the C—Job1 C—Job2 remove(6 5 font) emove(6 1 macro) %%IncludeFeature:remove(6 1 macro) remove(6 5 font) %%IncludeFeature:removeresource(resource id object id) resource id %%IncludeFeature:install command precedes the %%IncludeFeature:remove command, the %%IncludeFeature:resource(resource id object code) %%IncludeFeature: resource object code %%IncludeFeature:font (font name) Variable %%IncludeFeature:fontid (index #) index # %%IncludeFeature:symbolset (name) Variable name Syntax %%IncludeFeature:criscrlf(value) <ESC>&k#G Format Boolean %%IncludeFeature:lfiscrlf (value) Format boolean %%IncludeFeature:linesperinch (#) Both the %%IncludeFeature:linesperinch and %%IncludeFeature:linesperpage DOC commands affect linesperpage Page Page Notices Page Page Page Configuration Menu Page Glossary AppleTalk Application ASCII Baud Rate or Baud Bit Bitmap Bitmapped Font Buffer Connector Connector Box Consumables Control Panel Controller dpi Driver DTR/DSR Electrophotographic Drum Emulation Excess Memory Client Expansion, RAM Factory Default Flash ROM Font Fuser Assembly Gamma Correction Gray Scale Handshake, Handshaking Hard Disk HP PCL HP-GL IDE IEEE Imageable Area Interface Port Jam Recovery Kanji Option Kit Landscape Orientation LCD Media Memory Memory Client Memory Upgrade Menu Key Non-volatileMemory Null Modem Cable NV RAM Off Line On Line Paper Path Parallel Interface Parity, Parity Check PCL PCMCIA Point Size Portrait Orientation PostScript Previous Key Print Density Printer Driver PROM Protocol Queue RAM Rasterization Resident Resident Fonts Resolution RISC Screen Angle Screen Font SCSI Security Card Select Key Spool Start-upPage Status Page Key Storage System Administrator Trailer Page Transformer Box Transparency Typeface Typeface Family Page Index Page Card Cassette supporter (O)3-4, (R)6-3 Cassette, media Chain Inputbins menu (R)4-43 Character Map menu (Lineprinter) Page Do Start Page menu (R)4-61 Do Sys Start menu (R)4-62 DOC Document Option Commands Documentation Page Page Page Page Page Landscape orientation (R)3-6 Language Laser Prep Laser safety (R)D-2 LaserJet 4Si (R)6-32 MacroMedia Macros Manual feed Manual notice (R)D-2 Margins Page Online/Offline key (GS)5-5, (GS)5-6 Operator Control menu (R)4-5 Optional accessories Options Orientation Orientation menu (R)4-45 Paper output ramp (R)6-15 Paper output ramp, optional (GS)1-16 Paper path (O)2-12 Paper size mismatch (O)6-23Status message (O)6-9 Paper size mismatch error (O)2-6 Paper Type menu (HP-GL) (R)4-15 Parallel Page Print problems (O)4-2 Print quality Print resolution (R)5-6Gray levels (R)5-6 Printer Printer commands (R)C-4 Page Select key (GS)5-6 Separator Serial Transmit (R)4-42 Serial interface Special pages Special Pages menu Special Symbols symbol set (HP-GL) Specifications Spool Page Toner absent Toner cartridge Toner out Toner Out Act. menu Trailer Inputbin menu