Updated DOC

 

 

Commands

 

 

 

 

Notes

If no %%IncludeFeature:install DOC command

 

 

is sent, the internal default location is used;

 

 

otherwise, this parameter, which must be

 

 

provided, specifies one of the alternate locations.

 

 

For most QMS printers, resource 6 is the system

 

 

disk.

 

 

 

 

object id

 

 

 

 

 

Purpose

Assigns an ID to an object, such as a font, macro,

 

 

or pattern

 

 

 

 

Range

0-32767

 

 

 

 

Default

0

 

 

 

 

Format

Integer

 

 

 

 

Notes

The object ID can be used instead of the usual

 

 

PCL command to assign an ID. This ID is

 

 

overwritten by any ID assigned from the PCL print

 

 

job, if present. If neither a DOC command nor the

 

 

PCL print job specify an ID, the default ID of 0 is

 

 

used. Identifiers must be unique. If the ID

 

 

matches an ID for an existing object, that object is

 

 

deleted and replaced by the new object. If a

 

 

%%IncludeFeature:remove command

 

 

precedes a %%IncludeFeature:install

 

 

command, the install command is ignored (these

 

 

two commands are mutually exclusive).

 

 

 

Document Option Commands

C-9