Memory

Notes

This memory client is not user-configurable.

 

If disk swapping is enabled (Administration/Memory/Enable

 

Disk Swap menu), the amount of memory displayed is larger

 

than the actual amount of memory installed in the printer.

 

 

Spooling

The K Mem for Spool memory client, listed on the status page as Host Input, is the total number of kilobytes of RAM allocated to all spooling buffers. This memory client stores incoming data from the various interfaces until it is processed and printed.

Menu

Administration/Memory/K Mem for Spool

 

 

Choices

00112-06144

 

 

Default

00200

 

 

Notes

This value must be greater than the sum of the Min K Spool for

 

all installed and enabled interfaces.

 

 

Notes

If you change the K Mem for Spool value, the printer

 

automatically restarts after you save your changes and exit

 

from the configuration menu.

 

 

When the sum of the Min K Spool for all interfaces is less than K Mem for Spool, memory is allocated as follows:

1Interfaces with Min K Spool (in the Administration/Communica- tions menu) value greater than zero to receive their specified allo- cation.

2Half of the remaining memory is equally distributed among any interfaces with a Min K Spool value of zero.

3The other half of the remaining memory is called float memory. This memory is divided among all ports with a Min K Spool value of zero. If only one port has a Min K Spool value of zero, that port receives all float memory.

Printer Configuration

4-53