Updating

System

Software

nMacintosh

a Open the Installer application.

nIf you’re using the SYSTEMDL.PS file (see the table in the previous section), double-click the PRINTSYSTEM.INSTALLER file icon.

nIf you’re using the SYSTEM.DL file (see the table in the previous section), double-click the SYSTEM- LOADER.1 icon.

bIn the dialog box that appears, change the Install Location to the folder you created in step 2. Use the drop- down list box to select Select Folder, in the Select the Installation Folder dialog box select the appropriate disk and folder, and then click Select.

cClick Install to begin the installation.

dWhen prompted, insert disk 2 of the system software.

The installation takes approximately 1.5 minutes. The Installer places the appropriate system software file (either SYSTEMDL.PS or SYSTEMLOADER) in the folder you selected in step b.

eWhen the installation is finished, you’re prompted to click Quit to exit the Installer program.

nPC

a At the DOS C:\DIRECTORY prompt, type x:pkunzip x:systemwhere DIRECTORY is the name of the new directory you created in step 2, and x is the name of the disk drive in which you inserted Disk 1.

bFollow the prompts. They instruct you to insert the system software disks in the following order:

n Last disk (system software disk 2) n Disk 1 (system software disk 1) n Disk 2 (system software disk 2)

Printer Options

6-65