d.Slide the display latch lock to the left and remove by pulling straight up from the base enclosure (4).
3.Remove the display latch spring buttons:
a.In the lower right corner of the base enclosure, remove the two Torx 9M2.0×4.0 screws (1) that secure the display latch spring button to the base enclosure.
b.Lift the right display latch spring button (2) straight up from the base enclosure.
4.Remove the tape (1) from the top of the speakers.
5.Disconnect the speaker cable (2) from the system board.
Component replacement procedures 97
