ExpressCard assembly
Description | Spare part number |
|
|
ExpressCard assembly for use in models without the Alcor chip upgrade | |
|
|
ExpressCard assembly for use in models with the Alcor chip upgrade | |
|
|
Before removing the ExpressCard assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 48).
5.Remove the service access cover (see Service access cover on page 50).
6.Remove the following components:
a.Hard drive (see Hard drive on page 60)
b.Optical drive (see Optical drive on page 65)
c.Keyboard (see Keyboard on page 67)
d.Top cover (see Top cover on page 71)
e.Video card fan/heat sink assembly (see Video card fan/heat sink assembly on page 84)
f.Processor heat sink (see Processor heat sink on page 86)
g.System board (see System board on page 107)
Remove the ExpressCard assembly:
1.Position the system board upright.
Component replacement procedures 111
