Speakers
Description | Spare part number |
|
|
Speaker |
|
|
|
Before removing the speakers, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 48).
5.Remove the service access cover (see Service access cover on page 50).
6.Remove the following components:
a.Hard drive (see Hard drive on page 60)
b.Optical drive (see Optical drive on page 65)
c.Keyboard (see Keyboard on page 67)
d.Top cover (see Top cover on page 71)
e.Video card fan/heat sink assembly (see Video card fan/heat sink assembly on page 84)
f.Processor heat sink (see Processor heat sink on page 86)
g.Processor (see Processor on page 90)
h.Modem module (see Modem module on page 92)
i.Audio/USB 3.0 board (see Audio/USB 3.0 board on page 94)
Remove the speakers:
1.Position the computer
2.Remove the display latch:
a.Remove the spring (1) from the display latch lock.
b.Remove the three Phillips M2.0×2.0 screws (2) from the display latch lock.
c.Push down the button (3) in the front right corner of the display latch lock.
96 Chapter 4 Removal and replacement procedures
