HP R12000 XR Displaying the Status or Active Alarms

LCD Configuration and Status

Displaying the Status or Active Alarms

The first option on the Main Menu is Status. Select this option and press the Enter button to display the status or active alarms for either the main module or electronics modules M1-M4.

Main Menu

Status

Main Module (MM) Status and Alarms

Select Main Module MM to display Status and Alarms for the main module. Table 3-3lists the possible status options. For a descriptive list of alarm causes and solutions, refer to the section, “LCD Alarm Troubleshooting,” in Chapter 5.

Status: Select

Main Module MM

NOTE: A display of x Alarms means that one or more alarms are present. The variable x indicates the number of alarms.

Table 3-3: Main Module Status Options

LCD Display	Explanation
Load Power Off	The UPS is in Standby mode and is not supporting the load.
System Normal	The UPS is operating normally from utility and is protecting the load.
	No alarms are present.
0 Alarms
Load Power On	The UPS is operating from utility and is protecting the load.
x Alarms
On Battery	The UPS is operating from battery and is protecting the load.
x Alarms
On Bypass	The UPS is operating from Automatic Bypass mode and is not
	protecting the load.
x Alarms
Manual Bypass	The UPS is operating from Manual Bypass mode and is not
	protecting the load.
x Alarms
Overload	The UPS is protecting the load. The current load level is exceeding
	the maximum operational range for the UPS.
x Alarms
Autocalibrating	The UPS is operating from utility and is protecting the load while it is
	performing the module-sharing calibration process.
x Alarms
	continued

HP Uninterruptible Power System R12000 XR Models User Guide 3-7